설명
Workplace Classification:
Hybrid : This role is categorized as hybrid. This means the successful candidate is expected to report to the Warren Tech Center three times per week, at minimum, or other frequency dictated by the business.
The Team:
At General Motors, we are committed to creating a world with zero crashes, zero emissions, and zero congestion. Our ADAS Compute hardware team is at the forefront of developing cutting-edge technologies like Super Cruise Hands-Free Automated Driving that enhance vehicle safety, performance, and autonomy.
As we move to in-sourcing hardware design we are building a hardware engineering team that will own the end-to-end design and development of our ADAS Compute hardware.
The Role:
In this role, the Staff Hardware Design Engineer – ADAS Compute will lead and be responsible for the complete technical design & development of the new ADAS Compute hardware platform for GM’s next generation vehicles. The role requires an experienced professional with expertise in automotive ECU architecture, design, and analysis, and a proven ability of successfully launching ADAS Compute hardware into production.
What You'll Do (Responsibilities)
- Lead the architecture and design of ADAS Compute electrical hardware: from SoC/key component selection, schematic capture, worst case analysis, PCB layout, bring-up, debug, signal integrity and power integrity (SI/PI), design verification test (environmental and EMC), to manufacturing support and production launch.
- Drive the design and development of the ADAS Compute hardware platform (from concept design to launch) while meeting cost, timing, quality, and safety targets.
- Oversee and guide a team of electrical hardware designers - providing technical direction, assigning tasks, and ensuring the team's productivity and efficiency.
- Collaborate with cross-functional teams, such as software, mechanical, and manufacturing, to ensure seamless integration of the electrical design of the ADAS Compute hardware.
- Work closely with contract manufacturing partners to ensure successful product build, from prototype through to mass production, while maintaining quality, cost, and timing targets.
- Lead electrical schematic design and PCB layout.
- Lead new IC design/development strategic to new ADAS Compute designs and architectures.
- Perform/support detailed hardware analysis – worst case analysis, signal integrity, power integrity, etc.
- Lead bring-up of hardware design from power supplies, SoCs, MCUs, SerDes interfaces, network devices, etc.
- Lead design for manufacturing (DFM), design for assembly (DFA), and design for testing (DFT).
- Drive the validation and testing of hardware components and systems, ensuring high levels of reliability and performance.
- Establish and oversee test plans and protocols to validate designs against requirements.
- Lead activities to analyze test results troubleshoot hardware issues, perform root cause analysis, and develop solution to resolve design problems.
- Support manufacturing partners in troubleshooting and resolving any production-related issues that arise during the manufacturing process.
- Conduct design reviews and provide constructive feedback to ensure optimal solutions.
- Lead/support DFMEA/PFMEA of ADAS Compute; ensure lessons learned and best practices are included.
- Mentor and provide technical leadership to hardware engineers, offering guidance in hardware design best practices and troubleshooting.
[Additional Description]
What You'll Need (Required Qualifications)
- Bachelors degree (or higher) in Electrical, Computer Engineering or related discipline.
- 10+ years of experience in electronic hardware design, with a strong focus on ADAS hardware design and automotive hardware electronics design.
- Proven ability of successfully launching ADAS Compute build-to-print hardware into production.
- Extensive experience in designing ADAS Compute hardware and components, such as SoCs, MCUs, PCIe, DDR, UFS, eMMC, GMSL, FPD-Link, Ethernet Switches, PHY, CAN, power supply design, etc.
- Strong proficiency in circuit design, schematic creation, PCB layout, signal integrity and power integrity, and power management.
- Experience in design & analysis tools like: Mentor Graphics (schematic & layout), Ansys (signal integrity), Simplis (power integrity), Altair (EMC), Mathcad, PSpice & Saber
- In-depth knowledge of requirements engineering process (FMEA, Preliminary Hazard Analyses).
- In-depth knowledge of verification and validation processes.
- In-depth knowledge of embedded software development, testing and associated tools.
- Understanding of hardware design and failure mode.
- In-depth knowledge of requirements engineering process (FMEA, Preliminary Hazard Analyses).
- In-depth knowledge of verification and validation processes.
- In-depth knowledge of embedded software development, testing associated tools, and collaboration with firmware and software teams.
- Understanding of hardware design and failure mode.
- Thorough knowledge of design development and test engineering, manufacturing and assembly operations, engineering processes and procedures.
- Knowledge of automotive industry standards (ISO 26262, ASIL) and safety-critical design principles.
- Experience with system-level integration, including interfacing with sensors, processors, and communication protocols.
- Experience with design for manufacturing (DFM), design for assembly (DFA), and design for testing (DFT).
People Skills:
- Excellent problem-solving, analytical, and communication skills.
- Proven ability to lead complex projects and work in a fast-paced, cross-functional environment.
•This position requires the ability to legally operate a motor vehicle on a regular basis. A company vehicle will be provided for this role with successful completion of a Motor Vehicle Report review.
•This job may be eligible for relocation benefits.
#LI-DH2
다양성 정보
General Motors는 법적으로 금지된 차별을 배제하는 것은 물론 포용성과 소속감을 진정으로 장려하는 직장이 되기 위해 노력하고 있습니다. 당사는 다양성이 보장되는 환경에서 직원들이 역량을 발휘하고 우리 고객을 위한 더 좋은 제품을 개발할 수 있다고 믿습니다. 따라서 입사에 관심 있는 사람이 있다면 포지션별 주요 업무와 자격을 확인하고 본인이 보유한 기술과 능력에 부합하는 모든 포지션에 적극적으로 지원하기를 장려합니다. 지원자는 채용 과정에서 역할 관련 평가(해당하는 경우) 및/또는 채용 전 스크리닝을 통과해야 합니다. 자세한 정보는 GM 채용 과정 안내를 참고하십시오.
공평한 취업 기회 선언 (미국)
General Motors는 공평한 기회를 제공하는 고용주임을 자부합니다. 자격을 만족하는 지원자는 인종과 피부색, 성별, 성적 지향, 성별 정체성, 국적, 장애, 재향 군인 보호법 적용 여부와 상관없이 채용 후보로서 심사를 받습니다.
숙소 (미국 및 캐나다)
General Motors는 장애인을 포함한 모든 구직자들에게 취업 기회를 제공합니다. 구직이나 취업 지원에 도움이 되는 합리적인 숙소가 필요한 경우 Careers.Accommodations@GM.com으로 이메일을 보내시거나 800-865-7580으로 전화주십시오. 이메일에, 귀하가 요청하는 특정한 숙소에 대한 설명과 귀하가 지원하는 직무와 채용 요청서 번호를 포함해주세요.