[Skip To Content]

Staff Hardware Design Engineer – ADAS Compute

  • Localização
    • Warren, Michigan
  • Agendar Full time
  • Postou

Descrição

Workplace Classification:

Hybrid : This role is categorized as hybrid. This means the successful candidate is expected to report to the Warren Tech Center three times per week, at minimum, or other frequency dictated by the business.

The Team:

At General Motors, we are committed to creating a world with zero crashes, zero emissions, and zero congestion. Our ADAS Compute hardware team is at the forefront of developing cutting-edge technologies like Super Cruise Hands-Free Automated Driving that enhance vehicle safety, performance, and autonomy.

As we move to in-sourcing hardware design we are building a hardware engineering team that will own the end-to-end design and development of our ADAS Compute hardware.

The Role:

In this role, the Staff Hardware Design Engineer – ADAS Compute will lead and be responsible for the complete technical design & development of the new ADAS Compute hardware platform for GM’s next generation vehicles. The role requires an experienced professional with expertise in automotive ECU architecture, design, and analysis, and a proven ability of successfully launching ADAS Compute hardware into production.

What You'll Do (Responsibilities)

  • Lead the architecture and design of ADAS Compute electrical hardware: from SoC/key component selection, schematic capture, worst case analysis, PCB layout, bring-up, debug, signal integrity and power integrity (SI/PI), design verification test (environmental and EMC), to manufacturing support and production launch.
  • Drive the design and development of the ADAS Compute hardware platform (from concept design to launch) while meeting cost, timing, quality, and safety targets.
  • Oversee and guide a team of electrical hardware designers - providing technical direction, assigning tasks, and ensuring the team's productivity and efficiency.
  • Collaborate with cross-functional teams, such as software, mechanical, and manufacturing, to ensure seamless integration of the electrical design of the ADAS Compute hardware.
  • Work closely with contract manufacturing partners to ensure successful product build, from prototype through to mass production, while maintaining quality, cost, and timing targets.
  • Lead electrical schematic design and PCB layout.
  • Lead new IC design/development strategic to new ADAS Compute designs and architectures.
  • Perform/support detailed hardware analysis – worst case analysis, signal integrity, power integrity, etc.
  • Lead bring-up of hardware design from power supplies, SoCs, MCUs, SerDes  interfaces, network devices, etc.
  • Lead design for manufacturing (DFM), design for assembly (DFA), and design for testing (DFT).
  • Drive the validation and testing of hardware components and systems, ensuring high levels of reliability and performance.
  • Establish and oversee test plans and protocols to validate designs against requirements.
  • Lead activities to analyze test results troubleshoot hardware issues, perform root cause analysis, and develop solution to resolve design problems.
  • Support manufacturing partners in troubleshooting and resolving any production-related issues that arise during the manufacturing process.
  • Conduct design reviews and provide constructive feedback to ensure optimal solutions.
  • Lead/support DFMEA/PFMEA of ADAS Compute; ensure lessons learned and best practices are included.
  • Mentor and provide technical leadership to hardware engineers, offering guidance in hardware design best practices and troubleshooting.

[Additional Description]

What You'll Need (Required Qualifications)

  • Bachelors degree (or higher) in Electrical, Computer Engineering or related discipline.
  • 10+ years of experience in electronic hardware design, with a strong focus on ADAS hardware design and automotive hardware electronics design.
  • Proven ability of successfully launching ADAS Compute build-to-print hardware into production.
  • Extensive experience in designing ADAS Compute hardware and components, such as SoCs, MCUs, PCIe, DDR, UFS, eMMC, GMSL, FPD-Link, Ethernet Switches, PHY, CAN, power supply design, etc.
  • Strong proficiency in circuit design, schematic creation, PCB layout, signal integrity and power integrity, and power management.
  • Experience in design & analysis tools like: Mentor Graphics (schematic & layout), Ansys (signal integrity), Simplis (power integrity), Altair (EMC), Mathcad, PSpice & Saber
  • In-depth knowledge of requirements engineering process (FMEA, Preliminary Hazard Analyses).
  • In-depth knowledge of verification and validation processes.
  • In-depth knowledge of embedded software development, testing and associated tools.
  • Understanding of hardware design and failure mode.
  • In-depth knowledge of requirements engineering process (FMEA, Preliminary Hazard Analyses).
  • In-depth knowledge of verification and validation processes.
  • In-depth knowledge of embedded software development, testing associated tools, and collaboration with firmware and software teams.
  • Understanding of hardware design and failure mode.
  • Thorough knowledge of design development and test engineering, manufacturing and assembly operations, engineering processes and procedures.
  • Knowledge of automotive industry standards (ISO 26262, ASIL) and safety-critical design principles.
  • Experience with system-level integration, including interfacing with sensors, processors, and communication protocols.
  • Experience with design for manufacturing (DFM), design for assembly (DFA), and design for testing (DFT).

People Skills:

  • Excellent problem-solving, analytical, and communication skills.
  • Proven ability to lead complex projects and work in a fast-paced, cross-functional environment.

•This position requires the ability to legally operate a motor vehicle on a regular basis. A company vehicle will be provided for this role with successful completion of a Motor Vehicle Report review. ​

•This job may be eligible for relocation benefits.

#LI-DH2

Informações sobre diversidade

A General Motors está comprometida em ser um local de trabalho que não só é livre de discriminação ilegal, como estimula verdadeiramente a inclusão e integração. Acreditamos enfaticamente que a diversidade na força de trabalho cria um ambiente no qual nossos colaboradores podem crescer e desenvolver melhores produtos para nossos clientes. Incentivamos os candidatos interessados a analisar as principais responsabilidades e qualificações de cada função e a se candidatar a qualquer cargo que corresponda a suas habilidades e capacidades. Os candidatos no processo de recrutamento podem, quando aplicável, ser solicitados a concluir com sucesso uma ou mais avaliações relacionadas à função e/ou uma seleção pré-emprego antes de iniciar o emprego.  Para saber mais, acesse Como contratamos.

Declaração de Igualdade de Oportunidades de Emprego (EUA)

A General Motors tem orgulho de ser um empregador que oferece oportunidades iguais.  Todos os candidatos qualificados serão considerados para o emprego, independentemente de raça, cor, religião, sexo, orientação sexual, identidade de gênero, origem nacional, deficiência ou status como veterano protegido. 

Adaptações (EUA e Canadá)

A General Motors oferece oportunidades a todos os candidatos a emprego, incluindo pessoas com deficiências. Se você precisa de uma adaptação razoável para ajudá-lo na sua pesquisa de cargos ou solicitação de emprego, fale conosco pelo e-mail Careers.Accommodations@GM.com ou pelo telefone 800-865-7580. No seu e-mail, inclua uma descrição da adaptação específica que você está solicitando assim como o nome do cargo e o número de requisição do cargo ao qual está se candidatando.