Staff Hardware Design Engineer - Central Compute

描述

Hybrid: This role is categorized as hybrid. This means the successful candidate is expected to report to Warren or Milford, Michigan three times per week, at minimum. 

The Role

At General Motors, we are committed to creating a world with zero crashes, zero emissions, and zero congestion. Our Central Compute hardware team is at the forefront of developing cutting-edge technologies like premium In Vehicle Infotainment display and audio features, Mechatronics control of the entire vehicle, radio and BT connectivity, and Super Cruise Hands-Free Automated Driving that enhance vehicle safety, performance, and autonomy. 

As we move to in-sourcing hardware design we are building a hardware engineering team that will own the end-to-end design and development of our Central Compute hardware.

In this role, the Staff Hardware Design Engineer – Central Compute will lead and be responsible for the complete technical design & development of a variant of Central Compute hardware for GM’s next generation vehicles. The role requires an experienced professional with expertise in automotive ECU architecture, design, and analysis, and a proven ability of successfully launching Compute hardware into production.

What You'll Do

• Lead the design of Compute electrical hardware: from SoC/key component selection, schematic capture, worst case analysis, PCB layout, bring-up, debug, signal integrity and power integrity (SI/PI), design verification test (environmental and EMC), to manufacturing support and production launch
• Oversee and guide a team of electrical hardware designers - providing technical direction, assigning tasks, and ensuring the team's productivity and efficiency
• Work closely with contract manufacturing partners to ensure successful product build, from prototype through to mass production, while maintaining quality, cost, and timing targets
• Lead electrical schematic design and PCB layout in Mentor Graphics
• Ownership of the Central Compute project files in Mentor Graphics. Support, and develop as necessary, processes to exchange files with other parties.
• Lead new IC design/development strategic to new Compute designs and architectures
• Perform/support detailed hardware analysis – worst case analysis, signal integrity, power integrity, etc.
• Lead bring-up of hardware design from power supplies, SoCs, MCUs, SerDes  interfaces, network devices, etc.
• Collaborate on design for manufacturing (DFM), design for assembly (DFA), and design for testing (DFT)
• Establish and oversee test plans and protocols to validate designs against requirements.
• Lead activities to analyze test results troubleshoot hardware issues, perform root cause analysis, and develop solution to resolve design problems
• Conduct design reviews and provide constructive feedback to ensure optimal solutions
• Support DFMEA/PFMEA of Central Compute Unit; ensure lessons learned and best practices are included
• Mentor and provide technical leadership to hardware engineers, offering guidance in hardware design best practices and troubleshooting

[Additional Description]

Your Skills & Abilities (Required Qualifications)

• Bachelor of Science in Electrical, Computer Engineering or equivalent.
• 10+ years of experience in electronic hardware design, with a strong focus on ADAS hardware design and automotive hardware electronics design
• Proven ability of successfully launching ADAS Compute build-to-print hardware into production
• Extensive experience in designing Compute hardware and components, such as SoCs, MCUs, PCIe, DDR, UFS, eMMC, GMSL, FPD-Link, Ethernet Switches, PHY, CAN, power supply design, etc.
• Strong proficiency in circuit design, schematic creation, PCB layout, signal integrity and power integrity, and power management.
• Experience in design & analysis tools like: Mentor Graphics (schematic & layout), Ansys (signal integrity), Simplis (power integrity), Altair (EMC), Mathcad, PSpice & Saber
• In-depth knowledge of requirements engineering process (FMEA, Preliminary Hazard Analyses)
• In-depth knowledge of electronic module verification and validation processes
• In-depth knowledge of embedded software development, testing and associated tools
• Understanding of hardware design and failure modes
• Thorough knowledge of design development and test engineering, manufacturing and assembly operations, engineering processes and procedures.
• Experience with system-level integration, including interfacing with sensors, processors, and communication protocols, preferably with ADAS, Infotainment and Mechatronics
• Experience with design for manufacturing (DFM), design for assembly (DFA), and design for testing (DFT)
• Experience with Mentor graphics project set up, exchange of files between companies, and translation tools
• Excellent problem-solving, analytical, and communication skills.
• Proven ability to lead complex projects and work in a fast-paced, cross-functional environment

What Will Give You A Competitive Edge (Preferred Qualifications)

• Masters degree
• Experience with automotive industry standards (ISO 26262, ASIL) and safety-critical design principles (QM-ASIL D)

This job may be eligible for relocation benefits. 

Renseignements sur la diversité

General Motors est résolue à être un lieu de travail qui est non seulement exempt de discrimination illégale, mais aussi un endroit qui favorise véritablement l'inclusion et l'appartenance. Nous sommes convaincus que la diversité de la main-d'œuvre permet de créer un environnement dans lequel nos employés peuvent s'épanouir et développer de meilleurs produits pour nos clients. Nous encourageons les candidats intéressés à consulter les principales responsabilités et compétences requises pour chaque rôle et à postuler à tout poste qui leur correspond. Dans le cadre du processus de recrutement, les candidats peuvent devoir, le cas échéant, réussir une évaluation liée au poste ou une présélection d'emploi avant d'être embauchés.  Pour en savoir plus, consultez notre processus de recrutement.

Déclaration concernant l'égalité d'accès à l'emploi (É.-U.)

General Motors est fière d'être un employeur souscrivant au principe de l'égalité d'accès à l'emploi.  Tous les candidats qualifiés seront pris en compte, sans égard à la race, à la couleur, à la religion, au sexe, à l'orientation sexuelle, à l'identité de genre, à l'origine ethnique, aux situations de handicap ou au statut protégé d'ancien combattant. 

Aménagements (É.-U. et Canada)

General Motors offre des occasions à tous les chercheurs d'emploi, y compris les personnes handicapées. Si vous avez besoin d'un accommodement raisonnable pour vous aider dans votre recherche d'emploi ou la soumission de votre candidature, envoyez-nous un courriel à l'adresse Careers.Accommodations@GM.com ou appelez-nous au 800 865-7580. Veuillez inclure dans votre courriel une description spécifique du type d'accommodement demandé, ainsi que le titre d'emploi et le numéro de demande du poste auquel vous postulez.