[Skip To Content]

Staff Hardware Engineer – DFx (Manufacturing, Test & Tooling)

  • 위치
    • Sunnyvale, California
    • Warren, Michigan
  • 직무 유형 Full time
  • 게시됨
  • Job Requisition JR-202611236

설명

The Role:

General Motors is leading the transformation of the automotive industry through electrification, central compute, and autonomous technologies. We are building a high-energy team of Senior DFx (Design for Manufacturing, Test, and Tooling) engineers to serve as the critical link between internal design teams and contract manufacturers for next-generation ECUs.

This team will establish and drive DFx processes for in-house GM designs, ensuring strong alignment between design and manufacturing. They will bring early insight into manufacturing, assembly, testing, and tooling—embedding best practices, lessons learned, and critical requirements into module development.

We are seeking a high-performing Staff DFx Engineer to represent the voice of manufacturing, testing, and tooling across GM’s electronics development. This role focuses on circuit board design, population, test, and assembly, working closely with both internal design teams and external manufacturing partners.

You will lead DFx strategy and execution for electrical controllers supporting GM’s Software Defined Vehicle (SDV) architecture, while building strong, cross-functional partnerships to ensure successful product delivery.

Responsibilities of the Design for Manufacturing, Design for Testing, Tooling Engineer include:

  • Work with cross functional teams for the selection of test point location, in-circuit board coverage, functional test requirements from design teams, and programming requirements from design/CM teams.
  • Expertise in process from bare board to fully populated, soldered, tested PCB
  • Expertise in Solder Paste/Stencil process and materials, SPI Solder process Inspection, Acceptance Criteria, SMD placement, line loading, AOI, Reflow profile, Intermetallic and PCB surface finish
  • Perform design calculations, GD&T and tolerance stacks required for tooling and test fixtures
  • Create 3D CAD, 2D CAD & lead CAD reviews with stakeholders.
  • Develop analysis and test plans for new designs, perform proof of concept tests and analysis.
  • Lead prototyping and testing, analyze test data, and make necessary adjustments to manufacturing process/materials, in-plant testing and tooling designs.
  • Work with electrical engineers and PCBA designers to integrate components into test fixtures for in-circuit, functional, and in-process SW programming.
  • Build partnerships with functional peers internally within GM and externally at CM suppliers to align on ECU design per development cycles.
  • Develop virtualization technologies that help accelerate and de-risk product development.
  • Communicate Contract Manufacturing progress and risks to stakeholders and customers.
  • Drive Cross CM strategies for commonality within GM’s in-house designs.
  • Solid organizational skills and the ability to manage multiple projects simultaneously.

Your Skills & Abilities (Required Qualifications)

  • BS in Electrical or Mechanical Engineering or equivalent engineering degree
  • 7+ years in-plant electronic control module manufacturing experience leading a cross functional team of Design/Manufacturing engineers for best in class DFM and DFT designs
  • Collaborative, team centered experience which leads to on-time delivery of quality products
  • Exceptional collaboration and teamwork skills; demonstrated ability for working across functional and organizational boundaries.
  • Proficiency in 3D CAD modeling, 2D drawings, schematic designs, test SW development, tolerance analysis, design for manufacturability, and assembly.
  • Strong analytical skills and engineering fundamentals in manufacturing, testing, tooling of automotive electronic modules.
  • Hands-on experience engaging with electronics manufacturers.

What Will Give You A Competitive Edge (Preferred Skills)

  • Master’s degree/PhD in Electrical or Mechanical Engineering
  • Mechanical design of PCBAs, computers, or automotive electronics
  • Experience establishing a DFx organization within an automotive OEM.
  • Industry leading expertise with aspects of manufacturing including:  Designed SMT placement equipment, solder reflow equipment, Developed AOI, SPI, Assembly line transfer equipment.

Compensation: The compensation information is a good faith estimate only. It is based on what a successful applicant might be paid in accordance with applicable state laws. The actual base salary a successful candidate will be offered within this range will vary based on factors relevant to the position, as well as geography of the selected candidate.
       • The salary range for this role is (159,400 to 245,000). The actual base salary a successful candidate will be offered within this range will vary based on factors relevant to the position.
       • Bonus Potential: An incentive pay program offers payouts based on company performance, job level, and individual performance.
Benefits:
       • Benefits: GM offers a variety of health and wellbeing benefit programs. Benefit options include medical, dental, vision, Health Savings Account, Flexible Spending Accounts, retirement savings plan, sickness and accident benefits, life insurance, paid vacation & holidays, tuition assistance programs, employee assistance program, GM vehicle discounts and more.

#LI-JK3

GM does not provide immigration-related sponsorship for this role. Do not apply for this role if you will need GM immigration sponsorship now or in the future. This includes direct company sponsorship, entry of GM as the immigration employer of record on a government form, and any work authorization requiring a written submission or other immigration support from the company (e.g., H1-B, OPT, STEM OPT, CPT, TN, J-1, etc.)

이 직무는 하이브리드 직무로 분류됩니다. 즉, 선발된 지원자는 특정 근무지로 주 3일 이상(또는 관리자가 지정한 다른 빈도로) 특정 근무지로 출근해야 합니다.

선발된 지원자는 이 직무를 위해 25% 미만의 출장을 다녀야 합니다.

이 직무는 리로케이션 혜택을 받을 수 없습니다. 모든 리로케이션 관련 비용은 최종선정 된 지원자가 부담해야 합니다.

다양성 정보

General Motors는 법적으로 금지된 차별을 배제하는 것은 물론 포용성과 소속감을 진정으로 장려하는 직장이 되기 위해 노력하고 있습니다. 당사는 다양성이 보장되는 환경에서 직원들이 역량을 발휘하고 우리 고객을 위한 더 좋은 제품을 개발할 수 있다고 믿습니다. 따라서 입사에 관심 있는 사람이 있다면 포지션별 주요 업무와 자격을 확인하고 본인이 보유한 기술과 능력에 부합하는 모든 포지션에 적극적으로 지원하기를 장려합니다. 지원자는 채용 과정에서 역할 관련 평가(해당하는 경우) 및/또는 채용 전 스크리닝을 통과해야 합니다.  자세한 정보는 GM 채용 과정 안내를 참고하십시오.

공평한 취업 기회 선언 (미국)

General Motors는 공평한 기회를 제공하는 고용주임을 자부합니다.  자격을 만족하는 지원자는 인종과 피부색, 성별, 성적 지향, 성별 정체성, 국적, 장애, 재향 군인 보호법 적용 여부와 상관없이 채용 후보로서 심사를 받습니다. 

숙소 (미국 및 캐나다)

General Motors는 장애인을 포함한 모든 구직자들에게 취업 기회를 제공합니다. 구직이나 취업 지원에 도움이 되는 합리적인 숙소가 필요한 경우 [email protected]으로 이메일을 보내시거나 800-865-7580으로 전화주십시오. 이메일에, 귀하가 요청하는 특정한 숙소에 대한 설명과 귀하가 지원하는 직무와 채용 요청서 번호를 포함해주세요.