[Skip To Content]

Electrical Hardware Engineer – MCU

  • 위치
    • Warren, Michigan
  • 직무 유형 Full time
  • 게시됨
  • Job Requisition JR-202616238

설명

The Role

General Motors is at the forefront of the transformation of automotive with the electrification of our portfolio and the development of leading-edge central compute, connectivity, and autonomous capabilities. Our Semiconductor Engineering team is a dynamic, high-energy, and innovative group focused on the design and commercialization of leading-edge silicon enabling the future of GM's Software Defined Vehicle (SDV) platforms—central compute units, aggregators, connectivity modules, and other controllers.

We are seeking a driven Hardware Engineer – MCU to join our Semiconductor Center of Excellence. In this role you will own the microcontroller (MCU) hardware engineering deliverables that bring our in-house ECU designs to life—from I/O and resource mapping through application schematic support, component-level safety analysis, and hands-on board bring-up and validation. You will work shoulder-to-shoulder with ECU design, software, functional safety, and PCB layout teams, and collaborate directly with silicon suppliers to ensure our MCU-based platforms are designed right the first time.

Responsibilities

  • Own MCU I/O and resource mapping for in-house ECU designs, reserving and allocating pins across GPIO, ADC, eMIOS/PWM, SPI, I2C, LIN, and other peripherals, and optimizing use of I/O expanders and ADC MUXes to meet system requirements.
  • Develop and maintain MCU application deliverables including the HSIS signal matrix, pin-mapping documentation, reference schematics, and symbol/library content, ensuring alignment with requirements and electrical design intent.
  • Lead component-level Design Failure Mode and Effects Analysis (DFMEA) for MCU sub-circuits (power, crystal, MCU-to-networking, MCU-to-PMIC, MCU-to-Driver, etc.) and ensure findings roll up correctly into ECU (system) level DFMEA.
  • Establish and execute electrical characterization and functional test plans for MCUs and supporting silicon including board bring-up, voltage-rail and ADC verification, and interface validation to confirm design intent ahead of formal qualification.
  • Perform hands-on debug and validation using tools such as oscilloscopes and JTAG/debug probes on ARM cores, including GPIO toggling and register-level verification.
  • Define MCU-to-peripheral interfaces (PMIC, ethernet switch, I/O expander, etc) and support change-control activities, coordinating design changes across suppliers and internal stakeholders.
  • Collaborate cross-functionally with ECU hardware design, HWIO/software, functional safety, Power, and PCB layout teams to define specifications and align on architectural and system-level requirements.
  • Develop clear component specifications within your scope to enable timely sourcing decisions aligned with electronic development and vehicle program milestones.
  • Partner with silicon and tooling suppliers (e.g., MCU vendors and analysis partners) to resolve technical issues and align on requirements.
  • Stay current with MCU product portfolios, supply-chain dynamics, and emerging technology roadmaps.

Qualifications – Required

  • Bachelor's degree in electrical engineering, computer engineering, or a related field.
  • 4+ years of experience in hardware design and development, including component- or board-level ownership.
  • Knowledge of microcontroller subsystems and IP blocks, including processor cores, memory, analog/ADC, communication peripherals (SPI, I2C, UART/LIN, CAN, ethernet), timers/PWM, and GPIO.
  • Demonstrated experience with MCU I/O and resource mapping, pin planning, and translating system/connector requirements into a hardware pin definition.
  • Hands-on experience with circuit design and analysis, including worst-case analysis, DFMEA, circuit simulation tools, and schematic capture tools (e.g., Mentor Graphics).
  • Experience with board bring-up, electrical characterization, and hardware validation of MCUs or similar silicon.
  • Hands-on experience with hardware debugging tools such as oscilloscopes and JTAG/debug probes.
  • Exceptional collaboration and teamwork skills; proven ability to work across functional and organizational boundaries.
  • Demonstrated ability to manage multiple assignments simultaneously, including planning, execution, and monitoring.
  • Strong problem-solving skills and ability to learn quickly.

Qualifications – Preferred

  • Master's degree in electrical engineering, computer engineering, or a related field.
  • Experience with automotive-grade MCUs (e.g., NXP S32K, Infineon AURIX, or similar) and their supporting PMICs.
  • Familiarity with automotive functional safety (ISO 26262) and component/ECU DFMEA methodology.
  • Experience with debug/validation toolchains such as Lauterbach TRACE32 and ARM Cortex-M/R core bring-up.
  • Familiarity with ECU-level hardware integration, HWIO software interaction, and requirements-driven design flows.
  • Experience contributing to hardware design processes, guidelines, or tools that enable other engineers.
  • Proven track record supporting ECU hardware development from requirements definition through validation.

#LI-JK3

다양성 정보

General Motors는 법적으로 금지된 차별을 배제하는 것은 물론 포용성과 소속감을 진정으로 장려하는 직장이 되기 위해 노력하고 있습니다. 당사는 다양성이 보장되는 환경에서 직원들이 역량을 발휘하고 우리 고객을 위한 더 좋은 제품을 개발할 수 있다고 믿습니다. 따라서 입사에 관심 있는 사람이 있다면 포지션별 주요 업무와 자격을 확인하고 본인이 보유한 기술과 능력에 부합하는 모든 포지션에 적극적으로 지원하기를 장려합니다. 지원자는 채용 과정에서 역할 관련 평가(해당하는 경우) 및/또는 채용 전 스크리닝을 통과해야 합니다.  자세한 정보는 GM 채용 과정 안내를 참고하십시오.

공평한 취업 기회 선언 (미국)

General Motors는 공평한 기회를 제공하는 고용주임을 자부합니다.  자격을 만족하는 지원자는 인종과 피부색, 성별, 성적 지향, 성별 정체성, 국적, 장애, 재향 군인 보호법 적용 여부와 상관없이 채용 후보로서 심사를 받습니다. 

숙소 (미국 및 캐나다)

General Motors는 장애인을 포함한 모든 구직자들에게 취업 기회를 제공합니다. 구직이나 취업 지원에 도움이 되는 합리적인 숙소가 필요한 경우 [email protected]으로 이메일을 보내시거나 800-865-7580으로 전화주십시오. 이메일에, 귀하가 요청하는 특정한 숙소에 대한 설명과 귀하가 지원하는 직무와 채용 요청서 번호를 포함해주세요.