[Skip To Content]

Process Engineer Mixing & Coating – Battery Cell Development Center

  • Emplacement
    • Warren, Michigan
  • Type d'emploi Full time
  • Posté
  • Job Requisition JR-202611099

Description

The Role

At General Motors, we’re driving the future of mobility through cutting-edge battery cell innovation.  As a Process Engineer for electrode Mixing & Coating, you’ll play a critical role in developing and refining cell technologies that power our electric future.  This is a hands-on, on-site position at the Battery Cell Development Center where you’ll collaborate with top-tier engineers and researchers to push the boundaries of cell technology.

We’re looking for a candidate who is passionate about advancing technologies in battery cells and eager to continuously learn and grow.  You will engage directly in a development manufacturing setting, collaborating closely with process, operations, maintenance, quality, and product engineering teams to develop and stabilize scalable manufacturing processes for battery cells.

What You'll Do

  • Process Development – Mixing & Slurry Preparation – You will help develop the process parameters, operating windows, and work instructions for slurry mixing (cathode and/or anode). Optimize mixing sequences, order of addition, shear rates, temperature, and vacuum/de‑aeration conditions. Characterize slurry rheology and stability to establish acceptance criteria and checks. Partner with product engineers and suppliers to qualify new active materials, binders, solvents, and conductive additives.
  • Process Development – Coating & Drying – You will help develop process parameters for roll‑to‑roll coating (e.g., slot‑die, comma bar) and drying for battery cell electrodes. Tune key settings (web speed, gap, pump settings, tension, oven zones, air flows) to meet coating thickness, uniformity, and defect targets. Develop and maintain procedures for set‑up, startup, changeovers, and shut‑down to ensure safe, stable operation. Interface with calendaring and downstream steps to ensure coating output supports density, porosity, and cell performance targets.
  • Scale‑Up, Trials & Continuous Improvement - Plan and execute DOEs and structured experiments to expand process windows and improve yield, scrap, and throughput. Partner with quality to analyze process and quality data and identify root causes of defects (e.g., streaks, agglomerates, edge defects, pinholes, delamination) and implement robust corrective actions. Support equipment commissioning, debug, and SAT/FAT for new mixing and coating assets or upgrades. Capture lessons learned and standardized best practices for reuse across campaigns and future lines.
  • Documentation – You will help to develop and maintain standard work, SOPs, control plans, and reaction plans for mixing and coating operations.  Work with quality to define CTQs/CTPs, sampling plans, and acceptance criteria for slurry, coated web, and in‑process checkpoints. Maintain clear documentation of trials, parameter changes, risk assessments, and process changes. Ensure compliance with GM safety standards, EHS requirements, and lean‑room/solvent‑handling procedures.
  • Cross‑Functional Collaboration - Work closely with operations/technicians to train and coach process intent, set‑up, troubleshooting, and best practices. Partner with maintenance and controls/automation team members to improve uptime, diagnostics, and error‑proofing. Collaborate with cell design, formation, and test teams to link electrode process conditions to cell performance and durability. Communicate technical learnings and recommendations clearly to both technical and non‑technical stakeholders.

Your Skills & Abilities (Required Qualifications)

  • Bachelor’s degree in chemical engineering, Materials Science, Mechanical Engineering, or related engineering field.

  • 3+ years of experience in process engineering, manufacturing engineering, or similar role in:

    • Li‑ion battery manufacturing, or

    • Coating, inks, films, or related web‑based processes, or

    • Other wet‑chemistry / mixing‑intensive manufacturing.

  • Hands‑on experience with mixing processes (slurry, inks, coatings, or adhesives) and basic rheology concepts.

  • Hands‑on experience with coating or web handling processes (slot‑die, comma bar, gravure, or similar).

  • Demonstrated ability to design and run DOEs, analyze data, and solve complex process problems with a structured approach.

  • Strong communication skills and ability to work cross‑functionally with operations, maintenance, quality, and suppliers.

  • Willingness to work in an onsite, pilot manufacturing environment with time spent on the production floor.

What Will Give You A Competitive Edge (Preferred Qualifications)

  • Direct experience in Li‑ion electrode manufacturing (slurry mixing, coating, drying, calendaring).

  • Experience with roll‑to‑roll coating equipment and web handling (tension control, edge guiding, defect detection).

  • Familiarity with battery materials (cathode/anode active materials, binders, solvents, conductive additives) and their impact on processability and performance.

  • Experience in a development, or ramp‑up environment (frequent changeovers, trials, and non‑steady‑state operation).

  • Working knowledge of SPC, DOE, and basic statistics applied to manufacturing processes.

  • Experience using manufacturing data systems (historian, MES, quality databases) for troubleshooting and continuous improvement.

  • Demonstrated commitment to safety, including solvent handling, powder handling, and clean‑room or dry‑room operations.

Additional Information

  • This role is categorized as onsite. This means the successful candidate is expected to report to Battery Cell Development Center (BCDC) in Warren, Michigan on a full-time basis

  • This role may require occasional off‑shift or weekend support during critical trials, debug, or ramp‑up phases.

  • Domestic and/or international travel may be required to visit equipment or materials suppliers, or partner sites, as needed.

GM does not provide immigration-related sponsorship for this role. Do not apply for this role if you will need GM immigration sponsorship now or in the future. This includes direct company sponsorship, entry of GM as the immigration employer of record on a government form, and any work authorization requiring a written submission or other immigration support from the company (e.g., H1-B, OPT, STEM OPT, CPT, TN, J-1, etc.)

Ce poste exige le travail en présentiel. Cela signifie que le candidat retenu devra se rendre à un site précis de façon permanente.

Le candidat retenu devra voyager <25 % pour ce poste. 

Ce poste peut donner droit à des indemnités de déménagement.

Renseignements sur la diversité

General Motors est résolue à être un lieu de travail qui est non seulement exempt de discrimination illégale, mais aussi un endroit qui favorise véritablement l'inclusion et l'appartenance. Nous sommes convaincus que la diversité de la main-d'œuvre permet de créer un environnement dans lequel nos employés peuvent s'épanouir et développer de meilleurs produits pour nos clients. Nous encourageons les candidats intéressés à consulter les principales responsabilités et compétences requises pour chaque rôle et à postuler à tout poste qui leur correspond. Dans le cadre du processus de recrutement, les candidats peuvent devoir, le cas échéant, réussir une évaluation liée au poste ou une présélection d'emploi avant d'être embauchés.  Pour en savoir plus, consultez notre processus de recrutement.

Déclaration concernant l'égalité d'accès à l'emploi (É.-U.)

General Motors est fière d'être un employeur souscrivant au principe de l'égalité d'accès à l'emploi.  Tous les candidats qualifiés seront pris en compte, sans égard à la race, à la couleur, à la religion, au sexe, à l'orientation sexuelle, à l'identité de genre, à l'origine ethnique, aux situations de handicap ou au statut protégé d'ancien combattant. 

Aménagements (É.-U. et Canada)

General Motors offre des occasions à tous les chercheurs d'emploi, y compris les personnes handicapées. Si vous avez besoin d'un accommodement raisonnable pour vous aider dans votre recherche d'emploi ou la soumission de votre candidature, envoyez-nous un courriel à l'adresse [email protected] ou appelez-nous au 800 865-7580. Veuillez inclure dans votre courriel une description spécifique du type d'accommodement demandé, ainsi que le titre d'emploi et le numéro de demande du poste auquel vous postulez.