Process Engineer Mixing & Coating – Battery Cell Development Center

Descripción

The Role

At General Motors, we’re driving the future of mobility through cutting-edge battery cell innovation.  As a Process Engineer for electrode Mixing & Coating, you’ll play a critical role in developing and refining cell technologies that power our electric future.  This is a hands-on, on-site position at the Battery Cell Development Center where you’ll collaborate with top-tier engineers and researchers to push the boundaries of cell technology.

We’re looking for a candidate who is passionate about advancing technologies in battery cells and eager to continuously learn and grow.  You will engage directly in a development manufacturing setting, collaborating closely with process, operations, maintenance, quality, and product engineering teams to develop and stabilize scalable manufacturing processes for battery cells.

What You'll Do

• Process Development – Mixing & Slurry Preparation – You will help develop the process parameters, operating windows, and work instructions for slurry mixing (cathode and/or anode). Optimize mixing sequences, order of addition, shear rates, temperature, and vacuum/de‑aeration conditions. Characterize slurry rheology and stability to establish acceptance criteria and checks. Partner with product engineers and suppliers to qualify new active materials, binders, solvents, and conductive additives.
• Process Development – Coating & Drying – You will help develop process parameters for roll‑to‑roll coating (e.g., slot‑die, comma bar) and drying for battery cell electrodes. Tune key settings (web speed, gap, pump settings, tension, oven zones, air flows) to meet coating thickness, uniformity, and defect targets. Develop and maintain procedures for set‑up, startup, changeovers, and shut‑down to ensure safe, stable operation. Interface with calendaring and downstream steps to ensure coating output supports density, porosity, and cell performance targets.
• Scale‑Up, Trials & Continuous Improvement - Plan and execute DOEs and structured experiments to expand process windows and improve yield, scrap, and throughput. Partner with quality to analyze process and quality data and identify root causes of defects (e.g., streaks, agglomerates, edge defects, pinholes, delamination) and implement robust corrective actions. Support equipment commissioning, debug, and SAT/FAT for new mixing and coating assets or upgrades. Capture lessons learned and standardized best practices for reuse across campaigns and future lines.
• Documentation – You will help to develop and maintain standard work, SOPs, control plans, and reaction plans for mixing and coating operations.  Work with quality to define CTQs/CTPs, sampling plans, and acceptance criteria for slurry, coated web, and in‑process checkpoints. Maintain clear documentation of trials, parameter changes, risk assessments, and process changes. Ensure compliance with GM safety standards, EHS requirements, and lean‑room/solvent‑handling procedures.
• Cross‑Functional Collaboration - Work closely with operations/technicians to train and coach process intent, set‑up, troubleshooting, and best practices. Partner with maintenance and controls/automation team members to improve uptime, diagnostics, and error‑proofing. Collaborate with cell design, formation, and test teams to link electrode process conditions to cell performance and durability. Communicate technical learnings and recommendations clearly to both technical and non‑technical stakeholders.

Your Skills & Abilities (Required Qualifications)

• Bachelor’s degree in chemical engineering, Materials Science, Mechanical Engineering, or related engineering field.

• 3+ years of experience in process engineering, manufacturing engineering, or similar role in:

  • Li‑ion battery manufacturing, or

  • Coating, inks, films, or related web‑based processes, or

  • Other wet‑chemistry / mixing‑intensive manufacturing.

• Hands‑on experience with mixing processes (slurry, inks, coatings, or adhesives) and basic rheology concepts.

• Hands‑on experience with coating or web handling processes (slot‑die, comma bar, gravure, or similar).

• Demonstrated ability to design and run DOEs, analyze data, and solve complex process problems with a structured approach.

• Strong communication skills and ability to work cross‑functionally with operations, maintenance, quality, and suppliers.

• Willingness to work in an onsite, pilot manufacturing environment with time spent on the production floor.

What Will Give You A Competitive Edge (Preferred Qualifications)

• Direct experience in Li‑ion electrode manufacturing (slurry mixing, coating, drying, calendaring).

• Experience with roll‑to‑roll coating equipment and web handling (tension control, edge guiding, defect detection).

• Familiarity with battery materials (cathode/anode active materials, binders, solvents, conductive additives) and their impact on processability and performance.

• Experience in a development, or ramp‑up environment (frequent changeovers, trials, and non‑steady‑state operation).

• Working knowledge of SPC, DOE, and basic statistics applied to manufacturing processes.

• Experience using manufacturing data systems (historian, MES, quality databases) for troubleshooting and continuous improvement.

• Demonstrated commitment to safety, including solvent handling, powder handling, and clean‑room or dry‑room operations.

Additional Information

• This role is categorized as onsite. This means the successful candidate is expected to report to Battery Cell Development Center (BCDC) in Warren, Michigan on a full-time basis

• This role may require occasional off‑shift or weekend support during critical trials, debug, or ramp‑up phases.

• Domestic and/or international travel may be required to visit equipment or materials suppliers, or partner sites, as needed.

GM does not provide immigration-related sponsorship for this role. Do not apply for this role if you will need GM immigration sponsorship now or in the future. This includes direct company sponsorship, entry of GM as the immigration employer of record on a government form, and any work authorization requiring a written submission or other immigration support from the company (e.g., H1-B, OPT, STEM OPT, CPT, TN, J-1, etc.)

Este puesto se clasifica como presencial. Esto significa que se espera que el candidato seleccionado se presente en una ubicación específica a tiempo completo.

El candidato seleccionado deberá viajar menos del 25 % del tiempo para este puesto.

Este puesto podría ser elegible para beneficios de relocalización.

Información sobre diversidad

General Motors se compromete a ser un lugar de trabajo en el cual no solo no haya discriminación indebida, sino que fomente con sinceridad la inclusión y el sentido de pertenencia. Creemos firmemente que la diversidad del personal crea un entorno en el cual nuestros empleados pueden prosperar y desarrollar mejores productos para nuestros clientes. Instamos a los candidatos interesados a que revisen las responsabilidades y aptitudes clave para cada puesto y se postulen para los puestos que coincidan con sus habilidades y capacidades. Es posible que, cuando corresponda, se les pida a los solicitantes que están en el proceso de contratación que completen satisfactoriamente una o más evaluaciones relacionadas con su función y/o una evaluación previa al empleo antes de comenzar a trabajar.  Para obtener más información, visite Cómo contratamos.

Declaración de igualdad de oportunidades en el empleo (EE.UU.)

General Motors se enorgullece de ser un empleador que ofrece igualdad de oportunidades.  Todos los solicitantes calificados serán tenidos en cuenta para el empleo sin distinción de raza, color, religión, sexo, orientación sexual, identidad de género, nacionalidad, discapacidad o condición de veterano protegido. 

Adecuaciones (EE.UU. y Canadá)

General Motors ofrece oportunidades a todos los solicitantes de empleo, incluyendo las personas con discapacidades. Si necesita una adecuación razonable para ayudarle con su búsqueda o solicitud de empleo, envíenos un correo electrónico a [email protected] o llámenos al 800-865-7580. En su correo electrónico, incluya una descripción del puesto específico que está solicitando, así como el título del empleo y el número de solicitud del puesto que está solicitando.